Peanut Harvester Mounted By Walking Tractor From Aike Co.,Ltd
Peanut Harvester Mounted By Walking Tractor machine main function
Automated agricultural equipment for harvesting peanuts. The peanut harvesting machine is mainly used for harvesting and stacking of underground fruits such as peanuts. The recovery rate is greater than 99% and the breaking rate is less than 1%.
Peanut Harvester main feature
The peanut harvester has good performance, wide adaptability and easy operation. The lower hanging pin shaft of the machine is inserted into the hanging armhole of the walking machine, and the pin is locked. The upper arm of the machine is linked with the central rod of the tractor, which can be rotated by rotating the central rod. Adjusting the depth of the implement, the split gearbox is fixed to the output shaft of the tractor, and the gearbox of the implement is connected to the split gear by the arm.
Peanut Harvester Mounted By Walking Tractor machine Technical parameters
Supporting horsepower: 8 horsepower or more
Line spacing (cm): 20-35cm
Working efficiency (hours) 3-6 acres
Applicable film width (cm) 60-90
Depth (mm) 0-300 adjustable
Peanut Harvester Installation and commissioning
Insert the lower hanging wall pin of the implement into the hanging armhole of the hand-held machine, pin the pin lock, and the upper arm of the machine is linked with the central rod of the tractor. The center rod can be rotated to adjust the depth of the implement, and the gearbox is fixed to the tractor. On the output shaft, the implement gearbox and the split gearbox are connected by a crank arm.
Peanut Harvester Technical maintenance and storage
1. After the end of each shift, the soil of all parts of the machine should be removed.
2. Check the fasteners of various parts, if loose and timely tighten
3. Check whether the rotating parts are flexible or not. If it is not normal, it should be adjusted and eliminated in time.
4. When not in use for a long time, the machine should be protected from rain and avoid contact with acidic substances to avoid corrosion. The blade should be oiled!