Operating steps of garlic harvest machine


2020-03-12

The new tractor front mounted garlic harvest machine is a professional garlic harvester from Aike Machinery. Its track width is 8cm and it does not hurt garlic. The four-wheel track is extended to allow free walking in the sticky ground where garlic grows. The power output is a 168F gasoline engine, and the power is strong. It can use for sowing, fertilizing, ditching, and ridge planting. The garlic harvester occupies the main position of the market with its unique advantages, the shaft drive type. Its characteristics are low breakage rate, no leakage, no skin damage, and high work efficiency.

Operating steps of garlic harvest machine

1. Add enough engine oil and fuel oil.

2. When the tractor front mounted garlic harvest machine is in use, it is engaged in neutral (high speed in the front, low speed in the rear, and neutral in the middle) to start the engine. Adjust the throttle to make the engine at idle speed, push the gear lever, and the gas pedal can work. Adjust the throttle to make the engine idle, push the gear lever to neutral, and press the stop switch to stop the engine.

3. The gearbox requires no maintenance for 2 years. After 2 years, the gear oil is changed once, and the gear oil is added 50 grams each time.

4. After sowing, you can raise the garlic knife and replace the weeding hoe to achieve the wedding function.

5. Install fertilizer buckets, chains, and fertilizer legs to achieve fertilization.

6. China tractor front mounted garlic harvester machine can also remove the scuttle rack and install a seeding bucket to achieve the seeding function. Sowing and fertilization can be carried out simultaneously.

Inquiry Now
Copyright © Taian Aike Machinery Co., Ltd. All Rights Reserved.