Maintenance & Repair Tips of Rice And Wheat Thresher


2019-05-17

Rice and wheat thresher after use for a period of time, in order to better work the equipment and extend the life of the equipment, the user needs to maintain and repair the equipment. The newly designed model 125 large rice and wheat thresher is also the same. Today, the professional threshing machine manufacturer Aike gave you a summary of the maintenance and repair tips of the equipment, hoping to help you better use the thresher equipment.

Maintenance & Repair Tips of Rice And Wheat Thresher

1. Check the protecting plate cover of the thresher whether is firm, if it is damaged and replace.
2. After the barrel of the thresher is repaired, should to static balance adjustment, until the balance is adjusted.
3. Install the ribs. Note that the slanting surface should be oriented in the feeding direction. The grain direction of the adjacent two ribs should be reversed to prevent the grain from moving to one end of the drum, resulting in uneven load.
4. Tighten the stud bolts to the specified torque. Generally, it is tightened 3-4 times; check whether each bolt has a lock nut. Because the Threshing machine works, the roller is running at a high speed, the nut is easy to lose, and the quality of the rod must meet the requirements, and cannot be replaced by other bolts.
5. After the threshing is finished, the dust and debris in the machine should be carefully removed; where the paint comes off, reapply the paint as required.
6. Complete maintenance, fill a sufficient amount of lubricating oil to each oil filling point and lubrication point, and apply oil and rust on the threads of each adjusting screw; place the thresher in a dry and ventilated shed, note not to put debris above the thresher to prevent deformation.

Inquiry Now
Copyright © Taian Aike Machinery Co., Ltd. All Rights Reserved.