Inspection and placement of Peanut Thresher with Dust Removal Sheller


2019-07-12

The mechanical equipment must maintenance after a period of use. The new peanut thresher with dust removal sheller is no exception. The new thresher is widely used for its high performance. Therefore, the maintenance of agricultural machinery directly affects the service life of agricultural machinery and performance. The following Aike Machinery to introduce how to prevent the new threshing machine rust.

Maintenance OF Peanut Thresher

First of all, most of the parts of agricultural machinery are made of iron. These iron parts should clean when not in use, coat with anti-rust paint and store in a dry and ventilated place.

Second, the new peanut thresher/groundnut threshing machine placed in a dry ventilated the place. When the wheel harvester and the tractor are put into stock, the wooden pier is used to jack up the front and rear axles of the locomotive. So that the tires leave the ground and do not bear the load, but maintain a proper amount of air pressure.

Third, if the new thresher is not in a free position when parked, the spring will lose its elasticity. Causing plastic deformation and being scrapped in advance. For example, the intake and exhaust valves of the engine should close to prevent the spring from being pressed and to prevent dust from entering the cylinder.

Installation OF Peanut thresher

1. Level the four feet of the equipment to ensure a smooth and firm. To reduce the shock.

2. If the motor is used as the power. It is necessary to check whether the power cord is firmly connected. And the winding is precision and installed according to the grounding wire.

3. Continuous feeding of peanuts, the amount of feed should appropriate. If the feeding is intermittent, it will affect production obedience. If the feeding amount is too much, the machine will stick and overload, resulting in burning the motor and damaging the equipment.

4. The water content of the threshed peanut vines shall not exceed 20%, and the water content is too high to reach the normal threshing result.

5. Before the end of the work, the peanut vines that have been put into operation will completely clean and discharge, and then stop the load.

Inspection and placement of Peanut Thresher

In order for peanut thresher to achieve the best threshing results, we have to arrange from the beginning to check the placement of the machine and how to use it. Important are the following points.

1. Level the four feet of the device to ensure a smooth and secure position. To reduce the shock.
2. If the motor is used as the power, it is necessary to check whether the power cord is firmly connected. And the winding is precision and installed according to the grounding wire.
3. Continue to feed the corn cob, the feed should appropriate. If the feeding is intermittent, it will affect production obedience. If the feeding amount is too much, the machine will be stuck and overloaded. Resulting in burning the motor and damaging the equipment.

4. The water content of the threshed corn cob should not exceed 20%. And the water content is too high to reach the normal threshing result.

5. Before the end of the work, the peanut vines that have been put into operation will completely clean and discharge, and then stop the load.

Use of Peanut/Groundnut Thresher

1. When threshing, the feeding should stop on average without continuation, and the intermittent continuation will affect the consumption obedience and threshing quality. If the symptoms of seizures, overheads, etc., can guide by wooden sticks, the peanuts should allow flowing in a calm manner. And excessive pressure should not apply.

2. When the threshing start is finished, the core outlet can block, and then opened after 105-205, so as to be fully threshed.

3. When there is an infarction between the roller and the concave plate, it is necessary to stop the machine in time. Check the reason, and then turn the internal peanuts off and then turn on the machine.

Inquiry Now
Copyright © Taian Aike Machinery Co., Ltd. All Rights Reserved.