The adjust of Silage Fodder Cutter Crop Straw Crusher
China animal silage fodder cutter crop straw crusher is widely used in agricultural production. Because of its convenient operation, small size, small footprint, labor saving, power saving, automatic feeding, and high output. However, before using the device, must adjust the device before it can work. How to adjust the device?
Adjust OF the Silage Fodder Cutter Crop Straw Crusher
1. Before using, first, adjust the fastening condition of each component of the equipment. If it is loose, tighten it.
2. Check if the belt tightness is appropriate, whether the motor shaft and the pulverizer shaft are parallel. And adjust if it is not suitable.
3. Before starting the equipment, first, turn the rotor by hand to check whether the hammer and rotor are running flexibly and reliably.
4. At work should pay attention to the operation of the pulverizer at all times. Should even the feeding, to prevent blocking the car, do not overload the machine for a long time. If find a vibration, noise, high temperature of the bearing and the body, stop the test immediately and continue working after troubleshooting.
5. Silage fodder cutter crop straw crusher in the work should carefully check materials to avoid copper. Iron, stone and other hard objects into the crushing room caused by accidents.