High-efficiency Peanut harvester with support of 18-40 horsepower
Structure of Peanut harvester
Because the peanut harvesting machine can better adapt to the agronomy of peanut planting: the requirements of production characteristics, and the adaptability to various soils, it is easy to operate, reasonable in structure, good in reliability, high in work efficiency, etc., and has been well received by farmers. And as an important part of the harvester, what is the role of its various devices? The following factory directly supply for peanut groundnut harvester manufacturer Aike to give you a brief introduction.
1. Conveying device, the conveying device is composed of a conveying wheel and a conveying belt with a front height and a low height, and the fruit removing device comprises a fruit removal roller, a net fruit roller, and a fruit removal net. The vibrating device includes a vibrating screen and a crank linkage mechanism located below the de-fruiting device, the front high and the low.
2. The sorting device includes a branching roller and a branching belt so that the peanut fruit dropped in the soil can also be picked up. The collecting device includes a fruit collecting bucket and a collecting bucket to collect and filter the peanut fruit after the net and the peanut meal after the fruit removal.
3. The conveying device is driven by the ground wheel, the fruit removing device, the vibration device, the branching device, and the collecting device are driven by the power output wheel, and the power output wheel can be matched with different powers such as a tractor, an agricultural vehicle and a diesel engine. Not only the peanuts have the functions of excavation, fruit removal, screening, collection, etc., but also have the function of picking up the residual peanuts in the soil.
Because people used to dig up the peanuts from the soil to reduce the labor intensity, the plows were used to excavate the peanuts from the soil. Although the labor intensity was reduced, there were more residual peanuts in the soil, and the soil was still manually picked up. Peanuts are very inefficient. However, the existing peanut harvesting machines have many types, and the structure is simple, and only has the excavating function, and then the remaining work is manually completed. The tractor mounted peanut harvester for ridge forming land. It can harvest 4-6 acres per hour. The 30-75hp Tractor Mounted Work width 48-78 cm Peanut Harvester, saving a lot of labor costs.
Method for improving the efficiency of peanut harvester
At present, the emergence of the farm used machinery factory price tractor mounted combine peanut harvester facilitates the peanut baking enterprise and also improves the efficiency of baking peanuts. At present, almost all the peanuts we buy on the market are harvested through the harvester. It is better to use the fruit picker than the current manpower baking, and the price will be cheaper.
1. Before use, first check whether the fasteners driven by tractor high-efficiency peanut harvester for the farm are tightened, whether the rotating part is flexible, and whether there is lubricating oil in each bearing. The sheller should be placed on a stable surface. At the same time, after the motor is started, the steering of the rotor should be consistent with the direction indicated on the machine. First idle for a few minutes, observe whether there is abnormal noise, and after the normal operation, evenly feed the peanuts.
2. According to the size of the peanuts to choose the appropriate screen, while the peanut fruit should be evenly distributed, appropriate amount, cannot contain iron filings, stones, and other debris, to prevent breaking peanuts and cause mechanical failure. When the peanuts cover the sieve surface, the rice switch can be opened.
3. When the peanut shells in the peanuts increase, the motor can be moved downwards to tighten the fan belt and increase the amount of blowing. When operating, people should not stand on the side of the belt drive to avoid injury. It should be ensured that there is sufficient lubricating oil in the transmission parts and bearings and cleaned and replaced regularly.
4. 30-75hp Tractor Mounted Work width 48-78 cm Peanut Harvester, used for supporting tractors, wide working width.
5. When using the peanut harvester for a period of time, when preparing to store the machine, the dust, dirt and internal residual grains and other debris should be removed, and the belt should be removed and stored separately. Clean all parts of the bearings with diesel oil, dry them and apple butter. The machine should be covered in a dry warehouse to avoid sun and rain.
6. The farm used Machinery Factory Price Tractor Mounted Combine Peanut Harvester.
Routine maintenance of peanut harvester
1. Before use, check the power supply and the switch must be in the off position.
2. After the motor is started, the steering of the rotor should be consistent with the direction indicated on the machine. Allow idling for a few minutes to see if there is any abnormal sound. When the operation is normal, the peanuts can be fed evenly.
3. When peanuts are fed, they should be even and proper. Do not contain iron filings, stones, and other debris to prevent breaking peanuts and causing mechanical accidents. When the peanuts cover the sieve surface, the rice switch can be opened.
4. Peanuts should be dry and wet, too dry, the rate of breakage is high, too wet will affect the work efficiency. Select the appropriate screen according to the size of the peanut.
5. When the driven by tractor high-efficiency peanut harvester for Farm, when the peanut shell increases in the peanut, the motor can be moved downward to tighten the fan belt and increase the air blow.
6. When operating, people should not stand on the side of the belt drive to avoid injury.
7. After a period of use, when preparing to store the machine, the dust, dirt and residual grains and other debris should be removed. The machine should be covered and placed in a dry warehouse to avoid sun and rain.
8. Remove the belt and keep it separately
9. Clean all bearings with diesel oil, clean, dry and coated with butter
10. Sufficient lubricating oil should be protected in the transmission part and bearing room and cleaned and replaced regularly.
11. The tractor mounted peanut harvester for ridge forming land, saving a lot of manpower.
Aike Machinery factory directly supply for peanut groundnut harvester, and the factory sells them directly. Welcome everyone to come and buy.