Chinese Herbal Medicine Harvester


2019-09-10

Introduction of Chinese herbal medicine harvester

The Chinese herbal medicine harvester has a reasonable structure, is convenient and practical, has low cost, is conducive to promotion, and is easy to operate. Can be used to: dig platycodon, salvia miltiorrhiza, Schisandra, Astragalus, wind, Ophiopogon, Codonopsis, Astragalus, Licorice, Banlangen, Bupleurum, Radix, Peony, Sophora, Polygala, Radix, Tianqi, Shengdi, Baizhu, Zhimu , Achyranthes, Radix Pseudostellariae, Aconite, Trichosanthin, Gentiana, Yusha, Nanxing, Pinellia and other medicinal materials harvesting machines. Medicinal harvester, products are sold to Xinjiang, Gansu, Inner Mongolia, Shaanxi, Shanxi, Hebei, Anhui, Jiangsu, Hunan, Hubei, Sichuan, Yunnan, and Northeast and North Korea.
Medicine Harvester

Structure of Chinese herbal medicine harvester

The utility model is characterized in that it comprises a frame, a support rod is arranged on both sides of the front part of the frame, a bearing seat is symmetrically connected to the upper part of the support rod, the bearing seat is connected with a front rotating shaft, and a middle part of the front rotating shaft is connected with a digging wheel and a frame the bottom of the front axle is connected to the front gear, the front wheel is connected to the cross beam on the circumference of the excavating wheel, the cross beam is obliquely connected to the excavating tooth, the rear part of the rack is connected to the engine, and the lower part of the rack is connected to the transport device.

The angle between the excavating tooth and the surface of the beam is 40-60 degrees, the length of the excavating tooth is 20-35 cm, the engine side is connected to the output shaft, and the output shaft is sequentially connected from the inside to the outside. a gearbox and a second gearbox, wherein the outer gear output shaft of the second gearbox is connected to the excavating gear, and the output gear between the first gearbox and the second gearbox is connected with a linkage gear, and the excavating gear passes through the chain and the front gear is connected, the transport device comprises a driven chain shaft, a driving chain shaft and a conveyor chain, the lower part of the excavating wheel has a driven chain shaft, the rear part of the frame is connected with the active chain shaft, the driven chain shaft ends, the active chain Both ends of the shaft The transport gears are connected, the transport gears are connected by a conveyor chain, and the support chains are connected between the transport chains. The front teeth of the excavation teeth are arc-shaped, and the distance between the support bars is 5-15 cm.

 

Inquiry Now
Copyright © Taian Aike Machinery Co., Ltd. All Rights Reserved.