Aike Machinery Farm use Tractor Mounted Combine Corn Harvester


2019-06-18

Corn harvesters are also known as corn harvesters. According to the production volume, it can dive into large corn harvester and small corn harvester. According to the model, it can dive into knapsack corn automatic corn harvester and self-propelled corn harvester. Knapsack corn automatic corn harvester combine maize harvester is a new type of research and development for new energy development and lightening the labor intensity of farmers because of the farmers’ requirements. Agricultural machinery that is inexpensive and suitable for the popularization of small four-wheels in rural areas, can be used to harvest corn stalks. It shortens the labor cycle of farmers’ friends and frees people from heavy physical labor. The following China knapsack corn automatic corn harvester manufacturer introduces the equipment.

The operation process of Corn harvester

Farm use machinery factory price tractor mounted combine corn harvester is mainly composed of cutting rod device, conveying device and hydraulic lifter. During the operation, the machine advances along the corn ridge direction, the cutter cuts the corn stalks, and the straw is output through the upper, middle and lower conveyor chains in the right direction, and is naturally placed to complete the harvest. The separation of the corn harvester power is the hydraulic lifting system of the driver operating the tractor. After the main engine is lifted up to the position where it is staying, the two B-type V-belts will stop rotating, cutting off the power input of the diesel engine and realizing the separation of the power. The cutter and conveyor belt will stop rotating. Otherwise, it will be in a working rotation state.

The tips consideration OF Corn harvester pre-harvest

1. Tractor mounted combine two rows corn harvester China made The field survey should be done in the first 10-15 days of harvest, the degree of lodging of the corn, the planting density, and the row spacing, the sag of the ear, the low crusting height, etc. And develop a work plan in advance;
2. 3-5 days in advance, for the ditches in the field, Gongtai will be leveled, and the installation of signs such as water wells, poles, pull wires and other inconspicuous obstacles, easy to work safely.
3. In the early stage of work, it is necessary to carry out trial harvesting, adjust the implements, and reach the agronomic requirements, then you can invest informal work;
4. Farm use machinery factory price tractor mounted combine corn harvester in the early stage of work, proper adjustment of the pick-up roll gap can reduce grain breakage. During work, pay attention to the fluency of the ear in the process of lifting, so as to avoid the card owner, blockage, observe the fullness of the ear box at any time, and timely dump the ear to avoid the card owner, blockage, and observe the fullness of the ear box at any time. , timely dumping the ear, so as to avoid the phenomenon of jamming when the fruit is full or when the grain is unloaded.

Knapsack corn automatic corn harvester combine maize harvester achieves the above technical indicators, the productivity of corn harvesters is a key factor in determining its technical and economic indicators. Generally, the mechanized harvesting of corn is completed, and the operations of peeling to collecting ear and straw returning to the field are 40 to 60 yuan per acre. The productivity of the single-row harvester is 2 to 3 mu/hour, and the productivity of the double-row harvester is 4 to 6 mu. When the productivity of the three-row harvester is 8 to 10 mu/hour, the harvest of the four-row harvester The productivity of the work is about 12 mu/hour. The production period of a harvest season is about 15 to 25 days. Calculating the efficiency of half the machine by the machine can recover the investment in about 2 to 3 years. And Knapsack Corn Automatic 2 rows Corn Harvester price also very cheap, able to meet the needs of users.

Use of corn harvesters

Tractor mounted combine two rows corn harvester china made is ideal for mechanical harvesting of corn harvesting when the corn is ripe or near maturity. The corn combine harvester is flexible and can be used with any plot, especially in the northern mountains. It is planted in small plots. Large harvester equipment cannot enter the plot and cannot be used. Only small corn harvesters can enter the plot. Production is also a time when small corn harvesters are showing off, and now the small corn harvester equipment is not only getting better national subsidy policies, but knapsack corn automatic 2 rows corn harvester price is also affordable, and its production efficiency is getting higher and higher. It can better meet the investment needs of the majority of small corn harvester equipment.

Aike Machinery is the professional China knapsack corn automatic corn harvester manufacturer, sell knapsack corn automatic 2 rows corn harvester, welcome to consult the price.

Inquiry Now
Copyright © Taian Aike Machinery Co., Ltd. All Rights Reserved.